Your Nearest Branch:

Your DIY Projects

Mobile Angle Grinder Stand - submitted by James1963

My Dad made this mobile angle grinder stand to regain lost bench space and to keep the tools off the floor.

Posted on July 02, 2013 at 7:25 AM
Crane Jib - submitted by James1963

My Dad made this crane jib. It fits on our Massey Ferguson tractor and comes in very handy for lifting Midalia Steel metal items around (such as for shifting a 'automatic gate' from shed to new position as main front gate.)

Posted on July 02, 2013 at 7:24 AM
Automatic Gate - submitted by James1963

My Dad made this automatic gate as he got frustrated of getting in and out of the car to open the old manual gate. It solar-powered by a panel and batteries mounted on top of a 100x100 duragal post. We left the original manual gates in place to allow acce…

Posted on July 02, 2013 at 12:24 AM
Octagonal Gazebo - Outdoor Entertainment Area - submitted by rossusy

Octagonal gazebo outdoor entertainment area ready for installation of corrugated iron this weekend.

My first experience with patio tube and a gazebo. The present structure built out of the head as you go with no plans, but a lot of thinking, measuring,…

Posted on June 27, 2013 at 5:09 AM
diy project - submitted by Gelliie

Not sure if you'd class this as 'do it yourself' more like utilising scrap after work to make something cause we could. This is a fireplace we made for our camp with bits of scrap from around the mine. Thought you all would get a bit of a laugh anyway smiling

Posted on June 24, 2013 at 9:39 PM
A Cubby For the Kids - submitted by dgham438

A sturdy cubby suited for the Pilbara region including high roof, vent, insulation and heavy duty tie down points incorporated into the design.

Posted on June 24, 2013 at 5:28 AM
Polishing a Turd - submitted by JOHNK65

This two tonne trailer was on its last legs with rust eating out the bottom of the box, after cutting 50mm from the box and dropping it back in and seam welding angle right around put posts and mesh in and a rear ramp new guards, a comprehensive wire brus…

Posted on June 21, 2013 at 5:55 AM
Bed Frame Project - submitted by JakeOz

I bought a very good mattress but was a bit disappointed with the quality of bed frames available for it. So I got two lengths of 65x35x3 and welded my own frame. Nothing will rattle this one apart in a hurry...

Posted on June 20, 2013 at 1:43 PM
Ute Crate - submitted by lenfield

A crate we use on the back of the ute to cart our livestock in.

Posted on June 19, 2013 at 1:36 PM
Patio Area - submitted by lenfield

Our patio area that we built. We use this area entertaining with our BBQ and pizza oven and watching the kids in the pool!

Posted on June 19, 2013 at 1:35 PM
Car Shed - submitted by lenfield

The Car shed we built

Posted on June 19, 2013 at 1:34 PM
Cart For the Pony - submitted by lenfield

Here is a cart we built to "ride in style"

Posted on June 19, 2013 at 7:55 AM
CAR TRAILER - submitted by lenfield

We needed to move our vintage car from SA to WA so my husband built himself a car transporter!

Posted on June 18, 2013 at 6:39 AM
Shade Cloth Patio and Privacy Fence - submitted by kelvin

The side of the house that I erected the patio steel frame on is north facing and gets all the summer sun, so makes this side of the house quite hot.
Also we have retaining on this side and are higher than the neighbours. The dividing fence is very low …

Posted on June 18, 2013 at 5:18 AM
A Bit of a Patio - submitted by Macca

Myself and a couple of mates built my patio over a couple of weekends,it's 18x6x3 metres,not a bad size

Posted on June 17, 2013 at 1:04 AM

© 2015 by Midalia Steel. All Rights Reserved. Design by Ad Impact Advertising
Terms & Conditions | Sitemap

Request a Quote