Your Nearest Branch:

Your DIY Projects

Horse Float - submitted by lenfield

We needed a horse float so hubby built one !

Posted on June 16, 2013 at 8:34 PM
LARGE ENTERTAINING AREA! - submitted by Rcatherwood

My fiance made this 11x6.5m patio himself from scratch (including making the trusses). Half of it will be enclosed as a games room shortly. It's perfect for entertaining!

Posted on June 16, 2013 at 7:29 AM
Numberplate bracket and rear guard attachment - submitted by gregt1954

I didn't like the look of the original tail light and plate mount on the 2012 Wide Glide, but none of the aftermarket alternatives were much good either! Nothing else for it but make my own! Rear mount plate to keep it legal and under guard tail/brake lig…

Posted on June 15, 2013 at 6:48 AM
Mobile workbench - submitted by Onetrack

Needed a mobile workbench for the back garage, so I rounded up some offcuts and half lengths, and went to work.
The legs are 100x50x3 RHS, the frame under the benchtop is 25x50x3 RHS, gusseted with 30x3 and 20x 3 flat bar.
Supports under the bench top…

Posted on June 15, 2013 at 3:46 AM
Wild Fish - By Wayne Trease - submitted by lenny

As I cant always go fishing ,I decided to build one of my own.This one will never be the one that got away !!

Posted on June 13, 2013 at 11:40 PM
Formula Vee Project - submitted by BYEO

Two shiny race cars went to Bathurst and two mangled race car chassis came home. We are planning to rebuild them but it is going to take a lot of new steel and time!!!
Bruce Yeo

Posted on June 06, 2013 at 6:41 AM
ISLAND DECK OUR STYLE - submitted by wateringfalls

This is a project that my father in law and I built out of steel.
We thought it would be good to put an different angle on it
Finished building this year, build on and off over weekends.
Took around 3 months.

Posted on June 06, 2013 at 12:51 AM
Dog Fence - submitted by terrymac

Building a fence to keep the dogs in. Have many more steel projects in mind would like $1000 start.

Posted on June 04, 2013 at 9:11 AM
Go Kart made by 14 Year old. - submitted by cameronjl

I have made this gokart using mostly 20x20 box tube and some 50x50 box tube. I used a 110cc atv motor and wheels. Some other small art were also used. The project took me about 2 months to build and alot of effort.

Posted on June 04, 2013 at 3:42 AM
Doggy Shelter - submitted by sabina2811

My Hubby and Father in Law butted heads while building this great shelter for our Doggy. Keeps him warm and dry in winter and has a sunbed for him to lie on sunny days

Posted on June 04, 2013 at 12:30 AM
Handmade Sports Car - submitted by Richardk

It took me over 3 years to make this from plans, and their is nothing better go out for a drive in something you've made with your bare hands. If you're handy with a welder and hack saw, you could have one too!

Posted on June 03, 2013 at 11:32 AM
A shed when you dont have a shed - submitted by mmmcdonald

This is the workshop for the poor bloke that doesn't have a shed.

I lost my garage a few years ago when we needed extra an room to keep my daughter from having to move out. I built this big steel framed toolbox/shed with two swing-up doors between t…

Posted on June 03, 2013 at 3:04 AM
Patio/Carport Extension - submitted by Cruickey

Time to add onto the patio I built a number of years ago.

Then the thoughts turned to room for another toy . . . . . so added a garage door and hey presto!!

All in one.

Posted on June 01, 2013 at 7:10 AM
STEEL STABLES - submitted by Von84

From the gates, to the shed frames to the yarding, we built this set of stables and yards from scratch and all from steel.

Posted on June 01, 2013 at 2:19 AM
MY DAD'S PROJECT - submitted by BAKESY

This is my mum and dad’s house in the making, my dad has been working on it every weekend for the last year or so.
The entire house from top to bottom has been built with his own hands!
The steel for the roof is from Midalia Steel and every piece weld…

Posted on May 30, 2013 at 11:52 PM

© 2015 by Midalia Steel. All Rights Reserved. Design by Ad Impact Advertising
Terms & Conditions | Sitemap

Request a Quote