Insulation
In W.A. we have extremes in Weather and the need to be energy efficient. The correctly specified insulation is critical for comfort and limiting energy use. Midalia Steel can supply everything you need from quality manufacturers – jobs big and small, domestic or commercial. Our suppliers can work out what insulation you need if you leave your building plans with us.
Product Categories
- Kingspan Air-Cell
- Insulbreak®
- Ceiling Insulation - Batts
- Vapa-Check™
Pricing has been temporarily removed, please fill out your shopping cart and we will send you back an official quote.
SHOW MORE
KINGSPAN AIR-CELL
Kingspan AIR-CELL insulation is a low volume, high performance insulation. This type of insulation is designed to replace both conventional and fibre based insulation, and vapour barrier insulation, all in this one application.
Most Kingspan AIR-CELL insulation products are CodeMark certified for compliance with the Building Code of Australia and Insulation standard AS/NZ 4859.1. with the exception of the Insulaire® product.
PRODUCT BENEFITS:
- Helps achieve a 6-STAR house energy rating
- Fire-tested and suitable for fire-prone areas
- Clean, fibre-free, non-itchy, non-allergenic
- All in one insulation, vapour barrier and radiant barrier
- Water resistant and not affected by humidity
| IMAGE | DESCRIPTION |
UOM |
QTY |
ADD TO CART |
SHOW MORE
INSULBREAK®
INSULBREAK® is ideal for providing a thermal break solution for steel-framed constructions, as required by the Building Code of Australia (BCA). It acts as a 3-in-1 solution providing: insulation, thermal break and vapour barrier. It is designed to reduce thermal bridging and conductivity between building elements. INSULBREAK® is the latest in fibre-free, non-allergenic insulation technology AIR-CELL insulation.
| IMAGE | PRODUCT |
SIZE |
UOM |
QTY |
ADD TO CART |
GLARESHIELD® by Air-Cell is also recommended for use as wall insulation, and under roof, ceilings and floors where it provides the benefits of not only insulation. But also vapour condensation in the one application. This product features an anti-glare coating on the upper surface and a high polish aluminium foil for the under surface separated by a fire retardant 20mm polyethylene cell structure.
THERMAL PERFORMANCE
The R-values shown in the tables below are Total R-values for the building element as required by the Energy Provisions of the Building Code of Australia. Kingspan AIR-CELL products are manufactured, tested and packaged in conformance with AS/NZS 4859.1:2002 - Amdt 1. The contribution of the product Total R-values depends on installation and environmental conditions. The R-value will be reduced in the event of the accumulation of dust on the upward facing surfaces and in those cavities that are ventilated.
Source: Kingspan AIR-CELL brochure information/specifications.
| ROOFING |
|
|
|
| APPLICATION | PRODUCT | HEAT FLOW IN | HEAT FLOW OUT |
|---|
| Metal Roofing (Not Ventilated) | Kingspan AIR-CELL Glareshield® | RT 2.6 | RT 1.2 |
| Tile Roof (Ventilated) | Kingspan AIR-CELL Glareshield® | RT 2.2 | RT 1.0 |
| Steel-Framed Roof (Ventilated) | Kingspan AIR-CELL Insulbreak® 65 | RT 2.7 | RT 1.3 |
| WALLS |
|
|
|
| APPLICATION | PRODUCT | HEAT FLOW IN | HEAT FLOW OUT |
|---|
| Double Brick Cavity Wall | Kingspan AIR-CELL Permicav® | RT 1.9 | RT 2.1 |
| Brick Veneer | Kingspan AIR-CELL Insulbreak® 65 | RT 1.9 | RT 2.2 |
| Brick Veneer | Kingspan AIR-CELL Glareshield® | RT 1.8 | RT 2.1 |
| Reverse Brick Veneer | Kingspan AIR-CELL Glareshield® | RT 1.9 | RT 2.1 |
| Steel Stud-Framed Wall | Kingspan AIR-CELL Insulbreak® 65 | RT 1.6 | RT 1.8 |
| Kingspan AIR-CELL Permishield® 65 | RT 1.6 | RT 1.8 |
| FLOORS |
|
|
|
| APPLICATION | PRODUCT | HEAT FLOW IN | HEAT FLOW OUT |
|---|
| Suspended Framed Floor (Open Beneath) | Kingspan AIR-CELL Permifloor™ 500 | RT 1.2 | RT 1.9 |
| Suspended Framed Floor (Enclosed Beneath) | Kingspan AIR-CELL Permifloor™ 500 | RT 1.9 | RT 3.3 |
| Underfloor Retrofit | Kingspan AIR-CELL Permifloor™ | RT 1.2 | RT 1.9 |
SHOW MORE
CEILING INSULATION - BATTS
Insulco® Fat Batts can help keep the inside temperature of your home between 8 to 12 degrees cooler in summer than an un-insulated home. In winter they help to keep you warmer by limiting heat loss, making your heating throughout winter much more efficient, therefore, helping you save on energy costs.
| IMAGE | PROFILE |
SIZE (mm x mm) |
UNITS |
UOM |
QTY |
ADD TO CART |
FATBATT TIP
'Don't forget to install Insulco FatBatt Acoustitherm in your internal walls for a quieter more peaceful home'.
*Applies to R2.5 through R3.5 430mm range.
| INSULATION (BATTS) |
|
|
| HOUSE SIZE SQUARES | HOUSE SIZE (m²) | NUMBER OF PACKS |
|---|
| 5 | 47 | 5 |
| 6 | 56 | 6 |
| 7 | 65 | 7 |
| 8 | 74 | 8 |
| 9 | 84 | 9 |
| 10 | 93 | 10 |
| 11 | 102 | 11 |
| 12 | 111 | 12 |
| 13 | 121 | 13 |
| 14 | 130 | 14 |
| 15 | 139 | 15 |
| 16 | 149 | 17 |
| 17 | 158 | 18 |
| 18 | 167 | 19 |
| 19 | 177 | 20 |
| 20 | 186 | 21 |
SHOW MORE
VAPA-CHEK™
VAPA-CHEK™ is a very popular form of under metal roofing insulation for domestic homes and commercial developments.
When installed correctly VAPA-CHEK™ helps to increase comfort all year round and reduces the energy required for artificial cooling and heating thereby reducing heating and cooling costs.
VAPA-CHEK™ can also be used in metal clad walls.
Made from FBS-1 bio-soluble Glasswool, and has been proven to provide effective thermal and acoustic performance. It also offers the best possible fire rating when tested to Australian Standard AS1530.3 Early Fire Hazard requirements. The Glasswool blanket is non-combustible and all Sisalation® foils used to produce VAPA-CHEK™ have a flammability index of less than 5 - when tested to AS 1530.3 standard. This makes VAPA-CHEK™ acceptable for use in bush fire prone areas.
| DESCRIPTION |
SIZE (mm x mm) |
THICKNESS (mm) |
AREA (m²) |
UOM |
QTY |
ADD TO CART |
